3 inlets and 3 outlets Dome Type Fiber Optic Splice Closure FTTH FTTX
Detailed product decription
Dome Type Fiber optic splice closure is suitable for single core and ribbon fiber ,
they apply to direct-buried,aerial ,pipelined applications.
Ø Asdesign of independent innovation,spinning type sealing device could effectively reduce the chance that sealing performance might be affected due to human factors, and greatly improve the credibility of sealing performance.
Ø Thesealing device of the closure adopts self-impacted hoop. The closure will besealed perfectly while the hoop fastened.
Ø Sealingstructure: Mechanical sealing ,It has four ports , andcould be used for both single core and ribbon fibers; apply to directburied,aerial,pipe-lined applications.
Ø The installation accessoriesprovided: sealing tape 1pc,pvc insulation tape 1pc,splice pipe ,nylon tie4pcs,plastic spanner 1pc,sticker, pole mounting hoop 1set
Main technical Indexes:
Ø Seal performance : the pressurein the closure is 100Kpa+-5kPa,put the closure into the water for15minutes,there is no air bubble ,and observed it for 24 hours ,there is nochange of air pressure
Ø Re-entry performance:after 3times of normal operations ,it can still be up to the seal performance standard
Ø Insulation resisitance: ≥2x104MΩ
Ø Withstand voltage strength :there is nopuncture and no arc-cover after the function of 15KVDC/1min.
| Model | Dimension (MM) | G.W./N.W(kg) | Material | Inlet/Outlet | Diameter of fiber cable | Capacity of FOSC | Dimension /CTN (cm) |
| GJS98 | 410*200 | 2.2/1.34 | PC | 2inlets and 2outlets | Φ20mm | Bunchy:12-144(cores) Ribbon:Max 432(cores) | 71*41*44.5 |
Product Tags:
|
|
Dome Type Fiber Optic Splice Closure 3 Inlets And 3 Outlets 12 / 24 Cores Images
|
